RSWA Software Releases

3.9.3.44 (2011/07/11)
- Synchronizer
  - Fixed USB device status detection issues when multiple memory stick devices are plugged into the computer at the same time
- Array Explorer
  - Added battery status indicator (works only on RSWA F1 hardware)
  - Improved end inspection confirmation dialogue to warn user if the inspection is missing some readings
  - Fixed: pass and fail now show popup menus when activated from a remote control
- Launcher
  - Added battery status indicator (works only on RSWA F1 hardware)
3.9.2.32 (2010/12/10)
- Synchronizer
  - Fixed a bug that on some system caused synchronization to fail when database files are located on a remote computer with slow connection.
- Array Explorer
  - Fixed a bug that caused inconsistent behavior in the Open Measurement dialog box columns
3.9.2.30 (2010/08/30)
- Array Explorer
  - New feature: Aggressive Peak Detection mode, helps to improve stick weld detection by handling small signal peaks more effectively. Disabled by default.
  - New feature: Surface Follower - allows to configure how the gates are positioned relative to the surface. Allows to provide more consistent results in some weld configurations. Disabled by default. See online documentation for the illustration.
  - Improved secondary echo algorithm. Now it provides better positioning of secondary gates for curved samples.
- Synchronizer
  - Bug fix: Export from RSWA unit sometimes did not work on dates at the beginning and at the end of the month.
  - Bug fix: Image transfer from Designer to RSWA was skipping some of the image files
  - New feature: Date range selector now highlights days that have one or more inspections with bold font
  - Improved compatibility with certain models of memory sticks
- Designer and Array Explorer
  - Bug fix: Custom mode inspections obtained with recent releases of Array Explorer could not be opened in the Designer.
3.9.2.28 (2010/07/28)
- Synchronizer
  - Fixed a number of issues related to transfer of files between RSWA and Desktop computers
3.9.2.27 (2010/06/09)
- All applications
  - fixed issues with JPEG image transfer
- Array Explorer
  - the calendar in the open inspection dialog now shows days (or months) that have measurements in bold font
  - minor adjustments in the circle detection algorithm that may have caused slightly undersized readings for small welds (or calibration coins)
  - implemented optional display of minimum diameter
  - implemented support for multiple transducer configuration through a command line switch
- Designer
  - fixed a bug that may have caused a failure when restoring database from previously saved archive
  - other minor bug fixes
3.9.1.24 (2010/04/15)
- Array Explorer
  - Fixed a bug in the secondary echo reflection algorithm that would show an occasional invalid floating point error
  - Fixed display of Setup warnings in the C-scan box
- All applications
  - Improved compression rate when storing images in PNG format
3.9.1.23 (beta) (2010/03/31)
- Array Explorer
  - Automatic decision algorithm - when "Show and apply" option is chosen, the Pass button works as Next to avoid accidental passing of welds.
- Designer
  - New feature - Image optimization, for more info, see http://doki.tessonics.net/proj/rswa-admin/{F7845198AD5A0253}
- Synchronizer
  - Fixed a number of synchronization issues with JPEG images
3.9.1.21 (2010/03/16)
- Minor bug fixes related to licensing and user management
3.9.1.20 (beta) (2010/03/01)
- Designer
  - Fixed a bug that prevented import of JPEG files
- Array Explorer
  - Implemented more robust surface tracking algorithms. Improved signal detection within surface gates. Overall, the C-scan images now should be more stable, especially when the surface is curved or the indentation is large.
3.9.1.18 (beta) (2010/02/08)
- Array Explorer
  - fixed a bug in the internal data management routines that may have caused an error when closing the inspection (or then the application was closed).
  - refined automatic decision making algorithm, now there is an option of automatically passing or failing a weld (see Settings -> User Interface -> Automatic Decision -> Show and Apply)
- Designer
  - implemented support for JPEG images; when the source image is in JPEG format, the internal storage format is also JPEG, for all other formats it is automatically converted to PNG.
- All applications
  - fixed a minor bug that may have prevented the login window to show properly in some systems
3.9.1.17 (beta) (2010/01/18)
- Array Explorer
  - Added support for the Tessonics remote control
  - Added search functionality for the current inspection
3.9.1.16 (2010/01/05)
- Reporter
  - Fixed several bugs that show up when working with empty or missing product data
- User Manager
  - Fixed a bug with alignment of some UI elements
- Synchronizer
  - Fixed a bug introduced in the previous release that caused Synchronizer to fail on some system.
3.9.0.15 (2009/12/15)
- Minor changes related to setting permissions on shared network drives
3.9.0.14 (2009/12/09)
- Array Explorer
  - Fix: Switching image tabs did not work in certain situations
  - Change: Log-in prompt is now shown after the main window becomes visible.
  - Other minor bug fixes
- Designer
  - Fix: XML import failed when the operating system was set up to use comma as a decimal separator
  - Fix: XML import failed when importing images
  - Fix: Restoring data source from backup may have failed for remote database locations
3.8.8.12 (2009/10/04)
- Array Explorer
  - Fix: center zoom on selected weld after changing images
  - Fix: sort part group and part name list by caption
  - Fix: controller re-activation was sometimes failing when restoring from hibernated state
  - Fix: The Array Explorer application was kept minimized then pushing Array Explorer button in the launcher.
  - Fix: The manual circle sizing was not working properly when the Secondary Echo algorithm was active.
  - Feature: Added an option of displaying automatic decision (good/marginal/bad). The algorithm compares the measured size and indentation to the specified thresholds and shows the decision in the C-scan area.
  - Adjustments: The secondary echo processing algorithm in Full mode is now more sensitive.
3.8.8.11 (2009/09/28)
- Array Explorer
  - Fixed a bug when manual circle sizing was not working for welds measured using the secondary reflection algorithm.
  - More aggressive secondary echo algorithm in Full mode now detects weaker pulses
  - Fixed a bug when Open inspection from file dialog was not working properly in Windows Vista or Windows 7 operating systems
  - Inspections will load much faster
- Designer
  - Image Editor will load much faster
3.8.8.10 (2009/08/28)
- All applications:
  - Enabled error logging to files. Now all error logs are collected in C:\tessonics\rswa\logs
- Array Explorer:
  - Diameter and indentation readings are using larger fonts. The size of the indicator is also slightly enlarged.
  - Fixed a bug in weld list thumbnail image drawing that occasionally caused access violation errors
  - Initial implementation of the new secondary echo detection algorithm (for testing only). This algorithm should improve interface reading for stick welds. Use Settings->Algorigthm tab to activate it.
- Designer:
  - Added paste from clipboard for inspection orders.
  - Improved weld grid navigation.
3.8.8.9 (2009/08/11)
- Array Explorer:
  - Fixed a bug when Open Inspection dialog was always showing "No" in "Bad Welds" column.
  - Fixed a minor display issue with calendar display, on some systems it was showing square boxes due to some symbols missing in a font.
- Designer:
  - Fixed a bug when inconsistent data entry in the grid was causing error dialog instead of popup notification.
3.8.8.8 (2009/08/12)
- All applications:
  - Included extensive debugging information and error handling. Unhandled exceptions now show error box with debugging info and an option to send this data to Tessonics.
- Designer:
  - Fixed a bug that sometimes prevented committing changes made in image editor
3.8.8.7 (2009/08/11)
- Installer:
  - Fixed a bug in the installer when in certain conditions it could overwrite an existing user database with the blank one.
3.8.8.6 (2009/08/06)
- Array Explorer:
  - Fixed "Can not focus on a disabled window" message when opening a new inspection.
3.8.8.5 (2009/07/30)
- User Manager:
  - Added -local and -shared command line flags that force the user manager into local or shared user editing modes.
- Translation:
  - Fixed some minor inconsistencies in Chinese and Japanese translation files.
- Array Explorer:
  - Fixed minor issues with sizing and focus control in the New Inspection wizard.
3.8.8.4 (2009/07/28)
- Launcher and Synchronizer:
  - fixed bugs with USB device detection. (If USB detection does not work properly on your system, you will need to browse to the installation file and launch it manually from Windows Explorer).
- Designer:
  - fixed bugs related to clipboard import
  - minor UI tweaks, removing some legacy code related to NWLB mode
- Translation:
  - removed support for Chinese Traditional language (not required at this stage).
  - included partial translation support for the Synchronizer. (Most of the messages seen by user can be translated. Some internal errors are not translatable at this stage).
3.8.8.3 (2009/07/21)
- User Manager:
  - Updated UI, fixed a bug with user image selection.
- Translation:
  - Included support/templates for Chinese Simplified and Chinese Traditional languages.
- All Applications:
  - Added support for the Chinese keyboard input. (Need to activate Chinese/MS-PinYin98 Keyboard layout in control panel, may work with other layouts)
3.8.8 (2009/04/02)
- Array Explorer:
  - Added option to show front plate indentation as a percentage
  - Added option to show stack thickness measured through center of the nugget
  - Minor bug fixes
- Designer and Reporter
  - Improved format of Inspection Report
  - Minor bug fixes
3.8.7 (2009/03/06)
- Array Explorer:
  - New user interface
  - Support for 3T measurements from one side
  - Added alternative A-scan display modes
- Designer and Reporter
  - Added support for minimum/maximum indentation fields
  - New feature: copy to the clipboard
3.8.5 (2008/09/17)
- RSWA Synchronizer:
  - Fixed slow synchronization issues
3.8.4 (2008/06/11)
- RSWA Synchronizer:
  - Improved synchronization algorithm
- Array Explorer:
  - Better wording for dialogs and pop-ups
- Designer:
  - Improved user interaction (entering welds)
  - Improved network sharing
3.8.3 (2008/04/09)
- Array Explorer:
  - fixed a bug when "New Unit" button was causing welds to have wrong timestamps
- Reporter:
  - fixed problem with Reporter database using shared data source
  - fixed a problem with 3T welds not showing second C-scan