Updating Software on RSWA Units

Copy the downloaded setup file from your desktop computer to a USB memory stick. Unplug the USB memory stick from the desktop computer.

Note: If you are running Windows 2000 or earlier, use the Safely Remove Hardware option before unplugging the drive, otherwise the file may be corrupt.

If the RSWA unit is not running, turn it on and wait until the unit boots up. Close all running applications. Log in as either the Admin user or as a user with System Administration permissions.

Note: If your screen does not look like the one in Figure 1, you will need to manually start the installer (start Windows Explorer; browse to the inserted USB drive; locate and run the setup file; proceed to Section “Initial Setup Stages”).

Figure 1. RSWA screen before updating the software

When you plug the USB memory stick into the RSWA, the USB Media button will appear at the right hand side of the Launcher screen (see the RSWA User Guide for information on the Launcher application). If the button does not appear, try to restart the RSWA unit. If this does not help, call Tessonics for assistance.

Click the “USB Media” button, then choose “Software Updates” and select the setup file to update the software. You can also choose “Browse USB Drive” to locate and run the setup file manually.